General Tools

Basic Tool SetElectrical Supplement Set
Engines and Transmission Supplement SetTransmissions Supplement Set
Engine Performance Supplement SetBrake and Chassis Supplement Set

BASIC TOOL SET

  • Description of Tool or Set
  • Punch and chisel set
  • Combination wrench set. 12 pt. 10mm to 19mm
  • 8mm Combination wrench 6 pt.
  • 24 oz. Ball peen dead blow hammer.
  • 32 oz. Plastic coated dead blow hammer.
  • Screw driver set. (Orange Handles - 8 pieces)
  • 3/8" drive shallow and deep socket set. 8mm to 19mm 6 pt.
  • 3/8" drive extension and adapter set. (includes three lengths:
  • 1 1/2", 3", 6"extensions, and two adapters
  • 3/8" female to 1/4" male & 3/8" female to 1/2" male)
  • 3/8" drive ratchet. (Standard length)
  • 3/8" drive ratchet. (Flex head, long handle)
  • 6" metal machinist rule. US and Metric
  • Spark plug gapper
  • 24" pry bar with handle.
  • Pick Set 4 piece with handles (Orange colored handles.)
  • Plier set. (Cutters, needle nose, slip joint.)
  • Adjustable Joint Plier
  • top

    ELECTRICAL SUPPLEMENT SET

    • Description of Tool or Set
    • 1/4" drive plastic box
    • 1/4" drive long shank driver w/female square dr
    • 1/4" drive sealed ratchet
    • 1/4" drive 2" knurled extension
    • 1/4" drive 4" knurled extension
    • 1/4" drive 6" knurled extension
    • 1/4" drive universal joint
    • 1/4" drive 7mm metric 6 point short socket
    • 1/4" drive 8mm metric 6 point short socket
    • 1/4" drive 9mm metric 6 point short socket
    • 1/4" drive 10mm metric 6 point short socket
    • 1/4" drive 11mm metric 6 point short socket
    • 1/4" drive 12mm metric 6 point short socket
    • 1/4" drive 13mm metric 6 point short socket
    • 1/4" drive 14mm metric 6 point short socket
    • Socket rail (length 7 3/8" to fit inside PB24)
    • 1/4" drive socket rail clips (9 minimum for the above rail)
    • 12v test light
    • Remote starter switch
    • Battery brush
    • Battery tester - thexton
    • top

      ENGINES AND TRANSMISSIONS SUPPLEMENT SET

      • Description of Tool or Set
      • Folding hex wrench set. (.050" to 3/16")
      • Metric folding hex wrench set. (1.5mm to 6mm)
      • Blow gun. (non-restrictive) rubber tip.
      • Bronze tip hammer. 24 oz.
      • Plastic faced gasket scrapper.
      • Tapered bronze punch. 10" long, 3/8" tip diameter.
      • 3/8" drive spark plug socket. 13/16"
      • 3/8" drive spark plug socket 5/8"
      • Feeler gauge set. .0015" to .035". 35 blades.
      • top

        TRANSMISSIONS SUPPLEMENT SET

        • Description of Tool or Set
        • Snap ring pliers. 3/32" Wide straight tips and 1/16" thick.
        • Snap ring pliers. 3/32" Thick ends with 1/8" dimple.
        • Convertible snap ring pliers. .070" tips
        • Convertible snap ring pliers. .047" tips
        • 3/8" drive extension. 10 or 11" long.
        • top

          ENGINE PERFORMANCE SUPPLEMENT SET

          • Description of Tool or Set
          • Mighty Mite vacuum pump
          • Spark plug gapper - conventional
          • Spark plug gapper - electronic
          • Modified spark plug - Kent Moore
          • Injector test noid - Kent Moore
          • Compression gauge set
          • Vacuum & fuel pump for carburetor pressure gauge set
          • High pressure injection fuel pressure gauge Set
          • top

            BRAKE AND CHASSIS SUPPLEMENT SET

            • Description of Tool or Set
            • 3/8" drive disc brake caliper set (Includes hex sizes:
            • 1/4",5/16", 3/8", 8mm, T40 Torx, T45 Torx, & T50 Torx)
            • Flarenut wrench 6 piece set - Metric (Includes sizes: 9-11mm,
            • 10-12mm, 13-14mm, 15-17mm, 16-18mm, 19-21mm)
            • Flip socket set (19-21mm, 3/4-13/16", & 3" extention)
            • Pinch bar 38"
            • 1/2" breaker bar
            • Combination wrench 12pt. 20mm
            • Combination wrench 12pt. 21mm
            • Combination wrench 12pt. 22mm
            • Combination wrench 12pt. 23mm
            • Combination wrench 12pt. 24mm
            • 40 oz. dead-blow ball peen hammer
            • Hub cap remover / installer
            • 1/2" Dr. Flex-head torque wrench 40-250lb.ft.
            • 1/2" Dr. super duty air impact gun
            • 1/2" Dr. impact socket set 6 pt. (3/8"-1") 11 pcs.
            • Flairnut wrench set (1/4 " to 13/16) 5 pcs.
            • Tire gauge 20-100 psi
            • Tire valve stem tool
            • Tire tread depth gauge
            • Air chuck
            • Brake service tool set (includes: spring pliers,
            • 29ºx45º adjusting tool, 8x10mm bleeder wrench,
            • double ended spring cap socket, and 1/4" handle)
            • top



Share this page on: